press release transmitted on behalf of: RENK Group. In case of any questions, please contact the issuer directly. Please do not reply to this e-mail.
******
Image material is available at www.presseportal.de/pm/171595/5584909
****** Green Steel: RENK supplies special gearboxes for the production of “green steel”
RENK Group, a market leading manufacturer of mission-critical drive technologies,is supplying three high-speed special gear units via RENK-Maag GmbH, a group company, for compressors for the production of so-called green steel to Siemens Energy Compressors GmbH as part of the “SALCOS” (Salzgitter Low CO2 Steelmaking) project of the Salzgitter AG steel group. The three integral gear units will be used in the compressors of a direct reduction plant of the SALCOS project at the Salzgitter site. RENK is thus underlining its position as a key supplier for the energy transition.
“We are very pleased to be part of this beacon project for green steel in Germany,” says Nadine Despineux, CEO of RENK’s Marine & Industry Division. “With our innovative gearbox solutions for the compression of hydrogen, we regularly push the limits of what is technologically feasible with incredibly high speeds. This way, we are already helping to reduce CO2 emissions in steel production by around 30 per cent. Water is then produced instead of CO2. This way, we support our customers significantly on their way from fossil energies to climate neutrality. And we see great growth potential, because the entire industry is currently converting its production processes.”
“With our technology, our customers are able to switch to hydrogen-rich reduction gas without structural changes to the integral gear compressors. As the name suggests, the gearbox is an integral part of this. We are glad to have RENK-Maag as a strong partner at our side. With this beacon project, we are supporting our industrial customers on their way to decarbonization and are thus an important building block for the steel industry to achieve its CO2 reduction targets,” says Clemens Förster, Sales Manager of Siemens Energy Compressors GmbH.
“Our high-speed gear units for compressors are an important component for the ramp-up of the hydrogen economy – whether for storage, processing or transport. These turbo compressors are characterized by a high pressure build-up and are suitable for large gas volumes,” says Thomas Fritschi, Managing Director of RENK-Maag in Winterthur. “Specifically, we are talking about gear units with a speed of 8,000 to 50,000 revolutions per minute – but we have also produced units with a speed of over 60,000 revolutions per minute. Just for comparison, the engine speed of a passenger car in normal driving is a maximum of 2,000 to 3,000 revolutions per minute.”
The gear units are developed and built at the RENK site in Winterthur, Switzerland. They are used in a direct reduction plant in Siemens compressors. In direct reduction, iron ore is converted into sponge iron with the help of a reducing agent. In the process, the reducing gas dissolves the oxygen out of the iron ore without it melting. This process takes place in the direct reduction plant at overpressure and at about 1,050 °C. The iron ore is reduced to sponge iron. Instead of CO2, this technology produces water, which in turn is reused in the integrated process. In a direct reduction plant, both natural gas and hydrogen can be used flexibly as reducing agents. In this way, the natural gas content is gradually reduced and finally completely replaced by hydrogen.
Against this backdrop, RENK is increasingly using the company’s existing industrial know-how in the field of high-speed gear solutions, couplings and slide bearings in new areas of application, including carbon capture technologies and heat pumps in addition to hydrogen.
About RENK Group
Headquartered in Augsburg, Germany, RENK Group is a globally leading producer of mission-critical drive solutions across diverse civil and military end markets. Our product portfolio includes gear units, transmissions, power-packs, hybrid propulsion systems, suspension systems, slide bearings, couplings & clutches and test systems. RENK particularly serves customers active in industries for military vehicles, naval and civil marine, cement and plastics production, oil & gas, as well as customers in hydrogen, CCUS and industrial heat pump applications. In the fiscal year 2022, RENK generated revenue of EUR 849 million.
For further information, please visit: www.renk.com
Disclaimer
This release contains forward-looking statements. These statements are based on the current views, expectations, assumptions, and information of the management of RENK Holding GmbH (the “Company”). Forward-looking statements should not be construed as a promise of future results and developments and involve known and unknown risks and uncertainties. Various factors could cause actual future results, performance, or events to differ materially from those described in these statements, and neither the Company nor any other person accepts any responsibility for the accuracy of the opinions expressed in this release or the underlying assumptions. The Company does not assume any obligations to update any forward-looking statements. Moreover, it should be noted that all forward-looking statements only speak as of the date of this release and that the Company assumes no obligation, except as required by law, to update any forward-looking statement or to conform any such statement to actual events or developments.
The Company expressly disclaims any obligation or undertaking to update, review or revise any forward-looking statement contained in this release, whether as a result of new information, future developments or otherwise.
Contact: RENK GmbH Gögginger Str. 73 86159 Augsburg Germany
Günther Hörbst, Head of Group Communications mailto:guenther.hoerbst@renk.com +49 160 5347450
******
Image material is available at www.presseportal.de/pm/171595/5584909
****** Green Steel: RENK supplies special gearboxes for the production of “green steel”
RENK Group, a market leading manufacturer of mission-critical drive technologies,is supplying three high-speed special gear units via RENK-Maag GmbH, a group company, for compressors for the production of so-called green steel to Siemens Energy Compressors GmbH as part of the “SALCOS” (Salzgitter Low CO2 Steelmaking) project of the Salzgitter AG steel group. The three integral gear units will be used in the compressors of a direct reduction plant of the SALCOS project at the Salzgitter site. RENK is thus underlining its position as a key supplier for the energy transition.
“We are very pleased to be part of this beacon project for green steel in Germany,” says Nadine Despineux, CEO of RENK’s Marine & Industry Division. “With our innovative gearbox solutions for the compression of hydrogen, we regularly push the limits of what is technologically feasible with incredibly high speeds. This way, we are already helping to reduce CO2 emissions in steel production by around 30 per cent. Water is then produced instead of CO2. This way, we support our customers significantly on their way from fossil energies to climate neutrality. And we see great growth potential, because the entire industry is currently converting its production processes.”
“With our technology, our customers are able to switch to hydrogen-rich reduction gas without structural changes to the integral gear compressors. As the name suggests, the gearbox is an integral part of this. We are glad to have RENK-Maag as a strong partner at our side. With this beacon project, we are supporting our industrial customers on their way to decarbonization and are thus an important building block for the steel industry to achieve its CO2 reduction targets,” says Clemens Förster, Sales Manager of Siemens Energy Compressors GmbH.
“Our high-speed gear units for compressors are an important component for the ramp-up of the hydrogen economy – whether for storage, processing or transport. These turbo compressors are characterized by a high pressure build-up and are suitable for large gas volumes,” says Thomas Fritschi, Managing Director of RENK-Maag in Winterthur. “Specifically, we are talking about gear units with a speed of 8,000 to 50,000 revolutions per minute – but we have also produced units with a speed of over 60,000 revolutions per minute. Just for comparison, the engine speed of a passenger car in normal driving is a maximum of 2,000 to 3,000 revolutions per minute.”
The gear units are developed and built at the RENK site in Winterthur, Switzerland. They are used in a direct reduction plant in Siemens compressors. In direct reduction, iron ore is converted into sponge iron with the help of a reducing agent. In the process, the reducing gas dissolves the oxygen out of the iron ore without it melting. This process takes place in the direct reduction plant at overpressure and at about 1,050 °C. The iron ore is reduced to sponge iron. Instead of CO2, this technology produces water, which in turn is reused in the integrated process. In a direct reduction plant, both natural gas and hydrogen can be used flexibly as reducing agents. In this way, the natural gas content is gradually reduced and finally completely replaced by hydrogen.
Against this backdrop, RENK is increasingly using the company’s existing industrial know-how in the field of high-speed gear solutions, couplings and slide bearings in new areas of application, including carbon capture technologies and heat pumps in addition to hydrogen.
About RENK Group
Headquartered in Augsburg, Germany, RENK Group is a globally leading producer of mission-critical drive solutions across diverse civil and military end markets. Our product portfolio includes gear units, transmissions, power-packs, hybrid propulsion systems, suspension systems, slide bearings, couplings & clutches and test systems. RENK particularly serves customers active in industries for military vehicles, naval and civil marine, cement and plastics production, oil & gas, as well as customers in hydrogen, CCUS and industrial heat pump applications. In the fiscal year 2022, RENK generated revenue of EUR 849 million.
For further information, please visit: www.renk.com
Disclaimer
This release contains forward-looking statements. These statements are based on the current views, expectations, assumptions, and information of the management of RENK Holding GmbH (the “Company”). Forward-looking statements should not be construed as a promise of future results and developments and involve known and unknown risks and uncertainties. Various factors could cause actual future results, performance, or events to differ materially from those described in these statements, and neither the Company nor any other person accepts any responsibility for the accuracy of the opinions expressed in this release or the underlying assumptions. The Company does not assume any obligations to update any forward-looking statements. Moreover, it should be noted that all forward-looking statements only speak as of the date of this release and that the Company assumes no obligation, except as required by law, to update any forward-looking statement or to conform any such statement to actual events or developments.
The Company expressly disclaims any obligation or undertaking to update, review or revise any forward-looking statement contained in this release, whether as a result of new information, future developments or otherwise.
Contact: RENK GmbH Gögginger Str. 73 86159 Augsburg Germany
Günther Hörbst, Head of Group Communications mailto:guenther.hoerbst@renk.com +49 160 5347450
****** This e-mail was sent to you by news aktuell GmbH on behalf of the issuer. The issuer / sender referred to in the “From” section is solely responsible for the content of this release.
To unsubscribe from these emails, click here: newsaktuell.de/unsub/32844423-f93468395c0b1f1bd5e45b1730d698e8
news aktuell GmbH – Ein Unternehmen der dpa-Gruppe Mittelweg 144, 20148 Hamburg Telefon: +49 (0)40 4113-32850, Telefax: +49 (0)40 4113-32855 www.newsaktuell.de
Registergericht: Hamburg, Registernummer: HRB 127245 Umsatzsteuer-Identifikationsnummer gemäß § 27 a Umsatzsteuergesetz: DE815240626 Vertretungsberechtigte Personen: Edith Stier-Thompson (Geschäftsführerin)